Welcome to fletrix.com on July 12 2009.
This is an internet experiment running to monitor browsing habbits of individuals through wikipedia contents.

Molar absorptivity

From Wikipedia, the free encyclopedia

Jump to: navigation, search

The molar extinction coefficient, also known as molar absorptivity, is a measurement of how strongly a chemical species absorbs light at a given wavelength. It is an intrinsic property of the species; the actual absorbance, A, of a sample is dependent on the pathlength l and the concentration c of the species via the Beer-Lambert law, A = εcl.

The SI units for ε are m2/mol, but in practice, they are usually taken as 1/M 1/cm or L/mole 1/cm. In older literature, cm2/mole is used. These units look very different, but it is just a matter of expressing volume in cm3 or L. To convert to standard units, divide by 1000. (1 liter corresponds to 1000 cm3.)

The molar extinction coefficient should not be confused with the different definition of "extinction coefficient" used more commonly in physics, namely the imaginary part of the complex index of refraction (which is unitless). In fact, they have a straightforward but nontrivial relationship; see Mathematical descriptions of opacity.

In biochemistry, the extinction coefficient of a protein at 280 nm depends almost exclusively on the number of aromatic residues, particularly tryptophan, and can be predicted from the sequence of amino acids.[1] If the extinction coefficient is known, it can be used to determine the concentration of a protein in solution.

When there is more than one absorbing species in a solution, the overall absorbance is the sum of the absorbances for each individual species (X, Y etc.):

A = (\varepsilon_{\mathrm X} c_{\mathrm X} + \varepsilon_{\mathrm Y} c_{\mathrm{Y}} + \cdots)l,

The composition of a mixture of N components can be found by measuring the absorbance at N wavelengths (the values of ε for each compound at these wavelengths must also be known). The wavelengths chosen are usually the wavelengths of maximum absorption (absorbance maxima) for the individual components. None of the wavelengths must be an isosbestic point for a pair of species. For N components with concentrations ci and wavelengths λi, absorbances Ai) are obtained:

A(\lambda_i) = l\sum_{j=1}^N \varepsilon_j(\lambda_i) c_j.

This set of simultaneous equations can be solved to find concentrations of each absorbing species.

The molar extinction coefficient \varepsilon is directly related to the Absorption cross section σ via the Avogadro constant:

\sigma = 2.303 \frac{\varepsilon}{N_A} = 3.82 \times 10^{-21} \varepsilon.

In units of cm2 [2]

The molar absorptivity is also closely related to the mass attenuation coefficient, by the equation

(Mass attenuation coefficient)×(Molar mass) = (Molar absorptivity).

[edit] References

  1. ^ Gill, SC; von Hippel, PH (1989), "(PubMed abstract) Calculation of protein extinction coefficients from amino acid sequence data", Analytical Biochemistry 182 (2): 319–26, doi:10.1016/0003-2697(89)90602-7, http://www.ncbi.nlm.nih.gov/sites/entrez (PubMed abstract) 
  2. ^ Lakowicz, Joseph R (2006), Principles of Fluorescence Spectroscopy (3rd ed.), Springer Science+Business Media, LLC, pp. 59 
Personal tools

Visit joltnews for the latest headlines
Visit bloit.com for company information
Geed Media does computer consulting on long island.
This page viewed times. See Logs